RESUMEN
Esta investigación de carácter experimental muestra los resultados obtenidos con la aplicación del método del rajueleo, ensayado con la aplicación de carga en un modelo a escala reducida que se construyó en el laboratorio de materiales de la Universidad Autónoma de Aguascalientes, con el propósito de conocer el comportamiento mecánico principalmente en la bóveda, ya que, estructuralmente hablando es considerado uno de los elementos clave en las edificaciones elaboradas a base de piedra.
El cálculo, la proyección y la construcción del modelo a escala reducida, derivó en una serie de actividades que se describen de manera puntual en el apartado de metodología en esta tesis. Una vez concluida la construcción del modelo a escala, se inicia con los ensayos aplicados de la siguiente manera, el primer ensayo se realiza con la junta totalmente sana y después de esperar un lapso de tiempo equivalente a 18 meses, fue necesario esperar un tiempo mayor al propuesto en el inicio de esta investigación, debido a la pandemia del COVID-19, en segundo lugar se procedió a desgastar la junta del modelo, generando un espacio entre piedra y piedra, simulando artificialmente el desprendimiento de juntas con el que cuenta nuestro caso de estudio, por último se ensayó el modelo con el método del rajueleo aplicado.
El resultado que se presenta con graficas carga-desplazamiento, muestra que se obtiene un mejoramiento en el comportamiento mecánico, aplicando el método implementado y propuesto como solución al desprendimiento de mortero en construcciones a base de piedra, enfocado principalmente en la bóveda, sin que esto sea una limitante para aplicar el método en las paredes de la construcción.
Palabras clave: Rajueleo, Bóveda, Mortero, Cal, Obra de piedra.
ABSTRACT
This experimental research shows the results obtained with the application of the “rajueleo” method. It was tested with the application of load in a reduced-scale model that was built in the materials laboratory of the “Universidad Autónoma de Aguascalientes” with the purpose of been aware of the mechanical behavior focusing on the vault referring to structure. It is considered as one of the key elements in stone-based buildings.
The calculation, projection, and construction of the model on a reduced scale derived a serie of activities that are described in a specific way in the methodology section of this thesis. Once the construction of the scale model was completed, the applied test in the following way began. The first test was carried out with the joint completely healthy and after waiting a period of time equivalent to 18 months. It was necessary to wait a longer time to the one proposed at the beginning of this investigation due to the COVID-19 pandemic. Secondly, the model joint was worn down, and generating a space between stone and stone in order for the model joint to artificially simulating the detachment of joints that our case study has. Finally, the model was tested with the applied squiggle method.
The result that is presented with load-displacement graphs shows that an improvement in mechanical behavior is obtained by applying the method implemented and previously proposed as a solution to the detachment of mortar in stone-based constructions. Focused on the vault, without being a limitation to apply the method on the walls of the construction.